The ICARUS electromechanical gearmotor by Stagnoli has been developed for the automation of sectional and counterweight overhead garage doors. ICARUS is available in two different versions according to the gearmotor max. traction power (600N or 1000N) and to the max height of the door (2,300 or 2,500 mm). Besides you can choose between a chain drive version or a belt drive version.
Models :
• T003523ATR: 600N Icarus with a 2300 mm travel, a chain drive and TI1000 control unit
• T003525ATR: 600N Icarus with a 2500 mm travel, a chain drive and TI1000 control unit
• TCG3523ATR: 600N Icarus with a 2300 mm travel, a belt drive and TI1000 control unit
• TCG3525ATR: 600N Icarus with a 2500 mm travel, a belt drive and TI1000 control unit
• T003823ATR: 1000N Icarus with a 2300 mm travel, a chain drive and TI1000 control unit
• T003825ATR: 1000N Icarus with a 2500 mm travel, a chain drive and TI1000 control unit
• TCG3823ATR: 1000N Icarus with a 2300 mm travel, a belt drive and TI1000 control unit
• TCG3825ATR: 1000N Icarus with a 2500 mm travel, a belt drive and TI1000 control unit
Applications: Icarus is suitable for the automation of garage doors up to 11.5 m2 of surface and up to 150 Kg of weight, for max. 6 minutes working time. The automation can also work without limit switch thanks to an encoder used for measuring the path of the door.
Speed: max. speed 9.3 meter/min. with slow down system at the end of the travel.
Control board: TI100
Power supply: 230Vac (50 Hz).
Thrust control: Icarus is equipped with electronic friction.
ICARUS special accessories
• Kit for travel extension (1170mm lengh)
• Adaptor arm for one-piece overhead doors
• External release for sectional doors
• External release for overhead doors
• Battery charger
• 12V 3Ah Batteries
