Key & Card ACCESS control
the system use for more than the admission control
eMail: office@key card.com Tel. 0043(0)5522 38627

megalock l -- the electronic closing system

megalock l

megalock l became in co-operation with a well-known lock manufacturer developed and comes particularly in the informal sector as lock into Clothes cabinets to the application.

megalock l is battery-operated, i.e. is not necessary a link to a voltage supply; beyond that no control units or programming devices are needed -- once installed each megalock l has a local intelligence, whereby an off-line operation is enabled.

But not only the security of the system becomes by the application that Transponder technology increases (unique identifier of all used Transponder, those with loss only from the system deleted will must); also the comfort within the entire system increases itself for the visitor, there with a transponder not only the cabinet to be locked knows, but all activities thereby executed and to be accounted for can (e.g. the acces to Sauna or Solarium, Squashcourt, Fitnessgeraeten, paying function at that bar ect.).


Special features from megalock l are:

 
comfortable operation by transponder technology  
openly for account and control systems 
simple planning, installation, maintenance and servicing 
flexibly programmable admission authorization by free or fixed allocation of 
 lock and transponder key 
simple coding of the transponder keys by the operator 
Falsification and manipulation security 
no wiring necessarily for line-up and operation 
variable transponder designs 

  
mega-LOCK multi-job reader

Read/Write read-in unit in the plastic housing

The multi-job reader is used by Key&Card into two different regard:
On the one hand the multi-job reader is used in connection with the software program Megalock Admin for the programming of the transponder keys used in the system. In addition the reader is attached to one with the software program equipped PC, and both the user transponders and the system transponder important for the operator can be changed comfortably certified or.
On the other hand with the multi-job reader the output, cancelling and administration of the user transponders as well as the diagnosis of the mega-LOCKS in the system are executed -- also for this is that Software program mega-LOCK Admin necessarily.

Special one Features:
compact building method and simple assembly
also as desk readers available
variable current supply
low capacity
high reader calibration width
Data encryption possible
new housing Design with larger functionality

 

mega-LOCK Programmer

Desktop device for the independent programming of user transponders

The mega-LOCK Programmer is a desktop device, which is used particularly by operators a mega-LOCK system.
On the one hand if user transponders can programmed, to be reprogrammed and from the system removed.
On the other hand with the mega-LOCK Programmer the output and cancelling of the user transponders is organized e.g. within the checkout area.
With the selection of the transponders it can be determined e.g. whether the customer forgot to leave his cabinet opened or like it around the battery charge of that lock is ordered, which was served last by the transponder.
To simple operation is the device with a LCD display and a one Keyboard equipped; the operation takes place menu-led.

Special features:
independent operation without connection to a PC
menu-led operation
variable current supply
low capacity
Data encryption possible

mega-LOCK info. terminal

Terminal to Information about occupied cabinets

The mega-LOCK info. terminal is a reader in a plastic housing, which informs the user of megalock l about the number of the cabinet locked by it.
The mega-LOCK info. terminal is needed everywhere, where mega-LOCKS are used in " free cabinet selection ", i.e. if the visitor can select exactly the cabinet for itself, that the size correct for it has and even is free (in contrast to it there is also a " fixed cabinet allocation ", where is assigned to each transponder excluding a cabinet).
For the selection of the number the user must keep its user transponder short before the terminal.

Special one Features:
large and clear display
simple assembly
variable current supply
low capacity
high reader calibration width
Data encryption possible

 

mega-LOCK Admin

PC software for the administration of locks, user and system transponders

The PC software mega-LOCK Admin is used basically in connection with a multi-job reader.
On the one hand with mega-LOCK Admin programming is made all transponders. Both the user transponders and the system transponders (e.g. so-called master keys as Haupt-und general key) can be programmed or created in such a way.
On the other hand the output, cancelling and administration of user transponders as well as the diagnosis of the mega-LOCKS in the system are executed.
It gives two versions to the software: while the Professional version that System houses is reserved, becomes the Programmer version of System operators used. The Programmer version of mega-LOCK Admin had in approximately the same functions as the Programmer for larger systems with many mega-LOCKS is recommended however the use of mega-LOCK Admin because of higher convenient operation and the larger Storage capacity.

Special features:
depending upon targeted application two software-Versions are available
Windows program for the simple administration
Link takes place over commercial COM interface

New electronic door catch on transponder base

Because of the large Success of megalock l which became electronic cabinet catch, now with mega-LOCKS an electronic door catch developed. mega-LOCKS operates just like his predecessor with 125 kHz transponders (HITAG1) and is suitable for each commercial door. It is inserted in place of a lockcylinder and locks the appropriate door by short reproaching of a transponder before reading electronics. Precision mechanics and electronics are accommodated in a fitting, so that standard mortice locks can be further used.

Where mega-LOCKS will be used?
mega-LOCKS above all will be used, where doors sensitive areas are to be protected and not opened by everyone. The product concept of mega-LOCKS implements one Price structure, which enables an application in high numbers of items. As markets can be served beside hotels and the industry above all the Facility management. In supplement of admission control systems, which are installed particularly at the outer skin of the object, mega-LOCKS protect sensitive areas inside the object unauthorized admission. For both components however only is the same transponder necessary, besides still for account machine, time registration terminal, Park systems etc. to be used knows.
The favourable price of mega-LOCKS in addition also the application in private houses interesting will make.

What makes mega-LOCKS the system?
Similarly as for megalock l the following components will be available also for mega-LOCKS:
mega-LOCK Programmer (off-line terminal for creating system and user transponders)
mega-LOCK multi-job readers (write reader for selection and describing transponders)
mega-LOCK Software (PC software for the administration of system and User transponders)
mega-LOCK megakey (System-und user transponder for the operation and use of the door catches)